Shimano bikes are a big name in the field of bicycle components and mountain bikes. The bikes are made by Shimano Inc., a Japanese company. The company has its headquarters in Sakai, Japan and is a world leader in the bicycle component market with around 50 percent of the market share.

The company produces outstanding divetrain, brake, pedal and wheel components for its mountain bikes. The components are sold as sets and can be used to complete a bike’s mechanical requirements.

The components in the company’s sets include crank sets comprising cranks and chain rings; bottom bracket; chain; rear chain sprockets or cassette; front and rear wheel hubs; gear shift levers; brakes; brake levers; cables; front and rear gear mechanisms or derailleurs.

Shimano mountain bikes became a name to reckon in the 1970s. They entered the United States bike market with a vengeance and initially paid attention to the basic systems. They also brought about innovation in the low end of the market with ideas like Positron shifting and front freewheel systems.

Even today the bikes stand for innovation and low prices. In the eighties the company introduced groupsets with AX technology that included aerodynamic styling and ergonomic pedals.

The company produces a wide range of Shimano mountain bike groupsets. These include cross country components like Yumeya, XTR (9 speed) and Deore XT (9 speed). For downhill or freeride components you can look at groupsets like Saint (9 speed) and Hone SLX.

They also offer recreational shimano mountain bike components like Alivio (8 speed) and Tourney (7 speed). The gruopsets are the best in their class and offer bike users unparalleled advantage because of their durability and ergonomic designs.

You can check out the vast array of innovative designs and accessories Shimano mountain bikes group sets have. Just log on to their official website to find the group set that’s perfect for you.

By: Farah Najwa

About the Author:

Mountain Bike Reviews

A mountain bike is specially manufactured and made for off-road. It is used for cycling on trails, declines, unpaved ways, uneven roads, jumping, off-road hindrances like rocks and trails. The tires of these bikes are exactly made for the upheaval of off-road as they are made knobby for traction and shock absorption. Rims for these bikes are approximately 559mm in size. In exceptional cases, there are few bikes in which bar ends are built in. the reason behind this bar end is to provide extra easiness in hill climbing whenever it is necessary.

On the basis of suspension, there are following designs of mountain bikes:

Rigid Design: In this design, there is no suspension but a frame with a rigid fork and rear is fixed.
Soft tail: There is small amount of suspension, which is activated by flex not by pivots.
Hardtail: There is no rear suspension but a frame with front suspension fork.
Dull or Full Suspension: It has rear suspension with a rear shock and front suspension fork. There is also linkage, which lets the back wheel moved on pivots.

There are many types of mountain biking including cross-country (XC) biking, trail biking, downhill biking and all-day endurance biking (AM).

Cross-country mountain bikes have light front and back suspension, which is achieved from lightweight construction in frame and other components of the bike.

Trail bikes are considered a cross between XC and AM bikes. There are many famous bikes in trail bikes including The Giant Trance, the trek fuel EX series, the Gary Fisher HiFi.

Downhill bikes are considered strongest bikes and have seven or more than seven inches of suspension travel. They are strongest bikes but very light in weight.

All-day enduring bikes (AM) are made to equal the gap between free ride bikes and cross-country bikes. They weigh between 30 and 35 pounds (14kg to 16kg).

By: Sarah Nabila

About the Author:

Best Mountain Bike Reviews

Want to jive with a bike through the treacherous trails of the mountains? Get on Rocky Mountain bikes and be ready for an electrifying ride! Rocky bikes are exceptional with a zing of difference. But the offerings of Rocky encompass the desires and needs of myriad off road cyclists

The World Of Rocky Mountain Bike

Rocky bikes are embossed with innovation, quality and value with exceptional design, fabrication, CNC-machining, paint and pre-assembly done in-house in Vancouver, British Columbia.

Rocky mountain bike is one of the leaders who realized that future biking is going to rely heavily on full suspension. They are the one who bought out the 3D Link multi-pivot linkage design years ago. There were bikes for huge downhill travel and free ride bikes. The want was of middle one, a lightweight design for more travel.

ETSX Or Energy Transfer System

The quest ended with ETSX. This is a featherweight package weighing 12.9 kilograms for the 19″ size and literally you can do ANYTHING with this bike.

This is geared with a double A-arm design, which as per the claim of Rocky Mountain is derived from Formula 1 racecar suspension. The design is beautiful with light and small suspension components. The main pivot point lies above the crank and just in front of the seat tube.

Moreover, there is really no chain stay, which can get in the way of the drive train. Sealed bearings at all of the pivots make the construction superb. By and large the rear wheel stays firmly planted onto the ground and the extra special traction is smooth under all conditions. Now great news! You can flip a quick release and alter the travel from 3.5 to 4.5 inches for a good ride in rough terrains for long travels and for an easy climb to the top of the mountain.

Some Other Specialties Of ETSX

1. The frame is prepared with Easton Bi-Oval RAD tubing

2. The welding is rock solid and big

3. The Fox Float RLC front fork has a very efficient lever on top of the right fork leg to control the spring tension

4. Two bottle mounts, one above and one below the down tube are there

The Part Mix Is Scrumptious. The List Goes Like This

1. Shimano 515 clipless pedals

2. The hubs, cranks, disc brakes, shifters and front derailleur are from Shimano XT

3. Thermo SP headset and Deus stem

4. Handlebar from favorite Easton Carbon Monkey Lite

5. Tires are from marvelous Hutchinson Mosquito

6. Wheelset is Rockies in house built Wheeltech, which includes Mavic X223 Disc rims, and DT spokes

At present, ETSX has three models.

Finding The Right Bike

Size does matter! And the best way to get the perfect size is testing several sizes in person at a Rocky Mountain bike dealer.

Warranty Coverage On Rocky Mountain Bike

Read the owner’s manual carefully. The shop from where you bought the bike will provide with initial information. You can also check out the “Warranty Inquiries” section in the website of Rocky Mountain Bicycles to get detailed info on warranties and guarantees.

Say good-bye to a bland life. Say hello to a daring journey on a sturdy beast, the Rocky mountain bike.

By: Robert Sheehan

About the Author:

Best Mountain Bike Reviews

The most commonly used Mountain Bikes are:

Downhill Bikes:Most prominently used for competition in which one goes down the hill. So with that speed, bikes need to be with tough frames and with heavy-duty brakes such as disc or hydraulic brakes.

XC Bikes: This is another kind of bike which is highly used for competition in which one can go both down and climb hills. So its frame should be light but reasonably tough. Brakes used in this particular bike are v-brakes and light disc brakes.

Hybrid Bikes: This category of bikes is a good option for those who want to ride on both mountains and road.

These bikes either run on front suspension or on full suspension (which is a combination of both front and back suspensions). Various kinds of brakes employed in these bikes are:-

Rim Brakes: They are both light and powerful but their power decreases in muddy terrain where they become slippery.

Disc Brakes: They are light and powerful and are not affected by weather.

Hydraulic Brakes: They are very powerful and don’t need much maintenance, but are expensive than other brakes.

Frame Materials: The bikes can be made of aluminum, steel or titanium. These are very important elements of the bike as their composition determines the weight, strength, responsiveness and life of the bike.

Size: Like conventional bikes, mountain bikes come in small, medium and large sizes. But different manufactures use different reference point of measurement therefore sizing is not always consistent.

Latest Trends:

All Mountain Bikes: The “All Mountain Bikes” are characterized by 5-6 inch (125-150 mm) rims to take on very rough conditions.

29er Bike: This uses 700cc-sized rims and is suited for tires of 2 inches (50mm) width or more, so that it is able to roll over the obstacles.

Singlespeed: This is a blend of simplicity with innovation in suspension design.

Some of the other trends includeStable Platform Value Suspension Technology. Here the compressor shim stack has been replaced with a pair of overlapping cups. It also employs VPP suspension designs to balance different forces thereby eliminating unwanted compression without limiting bump absorption.

By: Andrew Caxton

About the Author:

Best Mountain Bike Reviews

Getting the proper sized bike for your body and riding style can make a big difference in how much you enjoy riding and how comfortable your bike is. Personnel at your local bike ship can help you to find the correct bike for your riding style and your body. Consider the hints that are below, and your bike will be the perfect size for you.

Standover Height
If you need to determine how the bike fits yourself, then the most important thing that you will need to consider is your inseam clearance. Make sure that there is enough space in the area between the top tube and your own body when you stop the bike. You want there to be clearance of about four to six inches from your inseam top to the top tube top.

Feet and Leg Position
Determining the proper leg position for riding your mountain bike is simple to do. It is important that you find the right position for your legs, because you constantly have to shift your position on the seat, due to terrain changes.

Due to the changes in terrain and the constant shifting, you will want to position the saddle of your bicycle a little lower than you normally would if you were riding a different bike. It is important that you consider this lower position when you determine what size frame that you will need.

Riding Compartment
One thing that you will want to think about and look at is the compartment layout for the rider. This is the distance that is located between the handlebars and the bicycle saddle. After you have determined the proper extension for your legs, you will want to ensure that the handlebars are one or two inches lower than the saddle height. The handlebars should never be at a great height than the height of the seat, unless you have a problem with your upper body.

Dual Suspension Bicycles
You want to make sure that the weight of your body is concentrated more in the center of the bike to make sure that it is distributed equally between the rear and front suspension units, which will help them work more efficiently and in tune with each other.

You can accomplish this quite simply by choosing to use either a shorter or higher step to help raise the height of your hands. This will help to move the height of the upper part of your body up and it will move the weight towards the rear of the bike. This increase should be no greater than two inches, so that the reach difference is no more than two inches.

Take a Test Ride
After you have considered each of these points, then it is time to take a test ride on your bike. It is important to wear your helmet, even while testing. Make sure that your tires are inflated to the right tire pressure and that the bike has been properly adjusted for your body. Then you are ready.

An employee from the bicycle shop should watch you when you are riding to make sure that the position and ride height is correct for you. If not, then you may need some additional adjustments. You should start your riding slowly and then gradually speed up when you get a better feel for the bike.

After you have ridden the bike for a while, then you may find that something seems off about the bike or it is not working right. If this occurs, then you want to have the problem corrected before you decide not to purchase the bike. It may be a simple adjustment that can make it into the bike of your dreams.

The greater number of bikes that you try out, the simpler that you will find it is to determine the similarities and differences in the types. It may take up to several years or just a few weeks for you to gain a greater appreciation for the handling of a particular bike. Talk to other bike riders to get recommendations and hints. This will help you gain more knowledge concerning locating the right mountain bike for your particular body and riding style.

By: Andrew Caxton

About the Author:

Best Mountain Bike Reviews

Mountain biking is a popular sport these days and it allows you to explore the world in a unique and fascinating way. However, as you will be going over all different types of terrain, there are times when your relaxing ride can turn into a frustrating nightmare. This is especially the case when your mountain bike’s tire needs changing.

Changing the tire on a mountain bike is not overly difficult. However, you will need the right tools and equipment to fix the tire and you will also need to know quite a lot about your bike. If you need to change the tires on your bike then here you will find a few tips to help you.

How to Change a Mountain Bike Tire

The first step to replacing and fixing the tire is to remove it. Different mountain bikes require different methods to remove an old tire. If you are dealing with a fairly new mountain bike then there should be a lever on every axle on the bike. Simply pull that lever and it should automatically loosen up the tire. All you need to do then is pull the tire away from the bike and it should come away. Older mountain bikes however are a little more difficult. If you are dealing with an old mountain bike then you will need to use a wench to loosen up the axle nuts. Only once all the nuts are loose can you then remove the tire.

When you have managed to get the tire off the bike, you should ideally let the air out of it so that you can get to the inner tube. You want to remove the tube and to do that you will need a few mountain bike tools to help you. You need to get the tire away from the rim and to do that you need to pry at it. Be extra careful not to damage the tube whilst you are taking this step.

Once the old tire has been removed from the mountain bike, it is then time to install the new one. Place the tire onto the rim of the bike. This may sound simple but it can be really difficult if you do not take notice of what you are doing. You may need a few tools to help you a little but always ensure that you are extra careful not to damage the inner tube. If you do end up damaging the inner tube you will have to go through the whole process again. Not only is that a lot of extra hassle, but it is also a waste of money. So always make sure that you are careful in every aspect of changing your bikes tire.

Overall changing a mountain bike tire is not as difficult as you may first imagine. You just have to be careful whilst you are doing it.

By: Alison Addy

About the Author:

Mountain Bike Reviews

Are you looking for adventure? Do you like traveling with your extreme gear with you? Or just looking out for a quality mountain bikes that suits your needs? Well, try to check this out and bring out the energy in you!

Mountain biking is a past time for most men. It is considered as one of the most popular sports for young and adults alike. If you’re into extreme sports! This is a better start! It is also good for your health just like running. Having an extra mile everyday will keep your body fit & healthy.

But of course for you to be feeling safe and comfortable you need to have quality mountain bikes! The quality and durability of equipment is for your safety and satisfaction.

We have here some of the quality mountain bikes that you may want.

If you are looking for a quality mountain bike without considering your budget, Trek Fuel Ex 8 is the best! This is one of the top pick this year. It is light weight because of its alloy frame. It is built for versatile bikers on the trail. If you are looking for high performance mountain bike, this would be the answer to your question!

Stumpjumper FSR Comp is the next one on the list. The price is cheaper than Trek Fuel Ex 8. With its new chassis design, it’s lighter and more efficient. It is considered as one of the best bikes on the trail. It has extremely light front end which is cool!

The next one is the Blur LT from Santa Cruz. This is more expensive compared to Trek Fuel Ex 8. What’s good in this mountain bike is that you can easily purchase and customized the parts in lower cost. It is considered as one of the best bikes! It is reliable and easy to adjust.

If you are in a tight budget, the next one would be the best option! The Rockhopper is a hard trail mountain bike. It is considered as traditional bike but excellent in price and quality. It is more affordable compared to those three mentioned above.

The last one on the list is the Trek 4300 which is cheaper than Rockhopper but still maintained its quality and excellence. The general form and positioning of the frame gives comfort to the bikers. It is light weight and very durable. Most bikers would say that it is reliable and well built.

These are just some of the quality bikes on the list. It’s up to you what to choose! It depends on your needs and your budget. Just a tip! Just be wise in choosing one! You can check online for more!

By: Azlan Idris

About the Author:

Mountain Bike Reviews

When mountain bikes first began to become popular is quite common to hear both non-cyclists and people who had been riding road bikes for years asking why. After all, except for the most expensive models, mountains bikes are often quite heavy and clunky, and besides, (with a few exceptions), most cities are not known for containing mountains!

However, mountain bikes turn out to be ideal for many commuters. Although heavy, they are also robust and sturdy, and therefore stand up well to city riding. Additionally, many people find mountain bikes easier to ride than road bikes, because mountain bikes have gears and brakes that can be accessed without taking your hands off the grips.

Of course, there are things about mountain bikes which aren’t ideal for urban use. Big chunky tyres designed for muddy tracks are not the best for city streets, a gear range designed for steep mountain slopes may not ideal for urban areas, and although city cycling can be tough on a bike, it’s not nearly as tough as riding on a mountain – and hence frames can be overly strong (and hence heavy). If you feel strongly about these things, perhaps you ought to consider a hybrid bike, whih has many of advantages of a mountain bike, but is more adapted to the urban environment.

On the other hand of course there are advantages to mountain bikes, and their extra strength is a positive boon if you find yourself carrying a lot of weight on your bike. Furthermore, after you have started riding a mountain during your regular commute to work, you may eventually be tempted to try the off-road experience at weekends.

By: Sunil Tanna

About the Author:

Mountain Bike Reviews

The first bicycle was made in Germany around 1820. The construction consisted of wood and brass parts and weighed a whopping 48 pounds! Chances are we would not recognize this contraption today, because we have come a long way in design and engineering. There are several styles choices from road bikes to mountain bikes to hybrids, each developed for differing cycling experiences. The mountain bike can have from 18 to 24 gears and front-end suspension. This increases the smoothness of the ride while assisting you in handling the ride in the traditional off-road conditions. For an even better ride, consider getting a rear suspension as well.

How do you find mountain bikes that are right for you? The first consideration may be financial, and there are large ranges of prices to fit every budget from